RC Balsa Airplane Kit Piper Cub J3, Laser Cut 46" Wooden Model Airplanes Kits to Build for Adults, DIY Unassembled RC Plane for Hobby Fly (KIT Only)
The Piper J-3 Cub is an American light aircraft that was built between 1937 and 1947 by Piper Aircraft. The aircraft is a high-wing has a
simple, lightweight design which gives it good low-speed handling properties and short-field performance.
Our model restores as much of the original model, all the parts are beautifully laser cutting for easy of construction. It has a solid and
lightweight framework structure built from balsa and hardwoods. It also has a molded plastic cowl, windscreen. In addition,
we attached with authentic functional landing gear, carbon tube wing spars, comprehensive hardware pack that includes nuts and bolts,
servo horns, rods and connectors etc, so you can build the perfect model. Once finished covering a beautiful film with the classic yellow
and with the addition of scale accessories such as a pilot, the perfect J-3 model was completed, then enjoy the flying.
Features:
1. Accurate laser cutting parts for easy construction
2. Premium balsa and plywood materials
3. Authentic functional landing gear
4. Molded plastic cowl and windscreen
5. Equipped with comprehensive hardware pack
6. 1180m upper wingspan for good stability
7. Recommended for intermediate or experienced builders
8. Enjoy the assembly process and fun flight
Specs:
Wingspan: 1180mm
Fuselage Length: 780mm
Flying Weight: 600g
Suggested Power System:(Not Included)
Electric Motor: 2212 1100KV(Not included)
ESC: 20A
Servo: 9g * 4pcs
Propeller: 8-9 inch
BATT: 3S 2200mAh(Not Included)
TX: more than 4CH(Not Included)
Covering Film: 4M yellow
Package Included:
1x Piper J-3 Cub Model Airplane Unassembled KIT
Please kindly notice that the item is not including any electronic parts or TX/RX. Please buy the suggested parts additionally.
IMPORTANT:
Unassembled balsa model kit
Recommended for experienced builders
Not suitable for beginners
Check all parts before assembly
Small parts may remain in wood sheets
Handle parts carefully to avoid damage
simple, lightweight design which gives it good low-speed handling properties and short-field performance.
Our model restores as much of the original model, all the parts are beautifully laser cutting for easy of construction. It has a solid and
lightweight framework structure built from balsa and hardwoods. It also has a molded plastic cowl, windscreen. In addition,
we attached with authentic functional landing gear, carbon tube wing spars, comprehensive hardware pack that includes nuts and bolts,
servo horns, rods and connectors etc, so you can build the perfect model. Once finished covering a beautiful film with the classic yellow
and with the addition of scale accessories such as a pilot, the perfect J-3 model was completed, then enjoy the flying.
Features:
1. Accurate laser cutting parts for easy construction
2. Premium balsa and plywood materials
3. Authentic functional landing gear
4. Molded plastic cowl and windscreen
5. Equipped with comprehensive hardware pack
6. 1180m upper wingspan for good stability
7. Recommended for intermediate or experienced builders
8. Enjoy the assembly process and fun flight
Specs:
Wingspan: 1180mm
Fuselage Length: 780mm
Flying Weight: 600g
Suggested Power System:(Not Included)
Electric Motor: 2212 1100KV(Not included)
ESC: 20A
Servo: 9g * 4pcs
Propeller: 8-9 inch
BATT: 3S 2200mAh(Not Included)
TX: more than 4CH(Not Included)
Covering Film: 4M yellow
Package Included:
1x Piper J-3 Cub Model Airplane Unassembled KIT
Please kindly notice that the item is not including any electronic parts or TX/RX. Please buy the suggested parts additionally.
IMPORTANT:
Unassembled balsa model kit
Recommended for experienced builders
Not suitable for beginners
Check all parts before assembly
Small parts may remain in wood sheets
Handle parts carefully to avoid damage